About tparrettcisco

tparrettcisco · 06-15-2018

I have a remote site connected to us with a Cisco 1941w router. Equipment on this side is a 1941. Working great. I need to scan the remote site. We only have a handful of devices there. When I run Advanced IP Scanner from my desktop I get a resp...

tparrettcisco · 02-13-2018

Just unpacked a new isr 4331 and working on the config. I need to set the duplex and speed on both interfaces. So far I have interface GigabitEthernet0/0/0description LANip address 10.1.1.218 255.255.255.0speed 1000no negotiation auto interface...

tparrettcisco · 05-08-2017

Is it possible to use 2 different ISPs on an ASA 5510. We are wanting 3 of our WANs to go out through ISPa and the remainder to go out through ISPb. I do not need configuration examples. I can open a ticket for that. I'm just now starting to plan ...

tparrettcisco · 05-19-2016

Experts I need some help.....I have several 1941w routers with EHWIC 4g-LTE-V cards and they are working well. Using the cellular connection as a failover. Can't get the new router to work. I've run debug modem and debug chat and when it fails ove...

tparrettcisco · 09-08-2015

I have 5 APs on my network being controlled by a 2500 controller. I need to add another AP. Can I add a second 2500 controller for additional APs?

tparrettcisco · 06-19-2018

Here are the settings I'm using on advanced ipscanner and here's another look at the scan I did...this is just a clip as you can see I have 2 printers on the network that respond, but the MAC address is wrong on both and the other IP addres...

tparrettcisco · 06-18-2018

I was using Advanced IP Scanner on the screenshot above. I also own netscantools pro and love it. My problem is that the router is responding to all the unused IP addresses and I'm concerned the scan is not accurate.

tparrettcisco · 06-18-2018

This is a good work around solution for me. Any idea why the router responds to every IP address that's unused?

tparrettcisco · 06-18-2018

the screenshot shows that the replies I'm getting are all from the same mac address. I know that these are unused IP addresses and this is the router responding.

tparrettcisco · 02-05-2015

Thanks for the quick response Richard...very helpful....one more question though....setting up the AnyConnect on the ASA will not affect my existing VPN at all....will it? As you might guess from this question I'm nervous and just now looking at how...

Member Since	‎09-28-2005 09:11 AM
Date Last Visited	‎06-03-2021 11:00 AM
Posts	14

User Statistics

User Activity

IP Scanning Remote Site

ISR 4331 Duplex and Speed Settings

Using 2 ISPs with ASA 5510

1941w EHWIC 4G-LTE-V Connection Timed Out

How many 2500 Wireless Controllers Can I Have

Re: IP Scanning Remote Site

Re: IP Scanning Remote Site

Re: IP Scanning Remote Site

Re: IP Scanning Remote Site

Thanks for the quick response