About Tadeusz Zeludziewicz

Tadeusz Zeludziewicz · 06-25-2018

Hello,On 9.1 we had an application using AxlSqlToolkit , working just fine.I'm trying to get it working after migration to 11.5, but have some issues with it.I have downloaded and installed the new AxlSqlToolkit from 11.5,for start I'm trying this si...

Tadeusz Zeludziewicz · 06-18-2018

Hi, I just have the same problem on version: 11.5.1.13901-3, we have the 2-nodes cluster, and bizarrley it only happens on the publisher. The issue seems to have been triggered by recent regeneration of certificates on the CM, to make them stronger. ...

Tadeusz Zeludziewicz · 10-25-2016

Hello, We have CUCM 9.1 with MGCP gateways + ISDN trunks, I'm looking for a solution for correct displaying of calling party in forwarded calls ... At present, when an incoming PSTN call is forwarded, what is displayed at the destination is our root ...

Tadeusz Zeludziewicz · 06-29-2018

Hi,while working on another problem, it has just turned out that the cause was the same: upon the upgrade of CUCM from 9.1 to 11.5, some system IDs have their password expiration changed from 99999 to 90, and dbaxlreadonly is one of them. After ch...

Tadeusz Zeludziewicz · 06-18-2018

and, in our case, the user IDs are quite normal - 3 or 4 digits, nothing unusual.

Tadeusz Zeludziewicz · 10-24-2017

Hello guys, I have encountered the same, but in my case the reason was trivial: the keyboard by default goes to Numeric on, I had to turn it off. The default is "password"as it should be. Cheers

Tadeusz Zeludziewicz · 04-14-2015

Hi,in my case: CUCM 9.1 + MGCP gateways,setting the cluster-wide CM service parameters below did get the job done :Incoming Calling Party National Number Prefix - MGCP Incoming Calling Party International Number Prefix - MGCP Incoming Calling Party S...

Tadeusz Zeludziewicz · 04-08-2015

Hi,my advice: stop struggling with MediaMaster and Java, switch to AudioText Manager (or ATM), as already suggested down this thread. It's really nice front-end to Unity Connection, and let's you do much more than saving a greeting.

Member Since	‎03-07-2014 05:29 AM
Date Last Visited	‎08-24-2018 02:02 AM
Posts	12
Total Helpful Votes Received	40

User Statistics

User Activity

issue with AxlSqlToolkit on CUCM 11.5

CSCvg93630 - Selfcare portal going blank for user id 2gpm_???

Using ISDN feature "Partial Rerouting" for correct displaying of calling party in forwarded calls

Re: issue with AxlSqlToolkit on CUCM 11.5

Re: CSCvg93630 - Selfcare portal going blank for user id 2gpm_???

Re: Assign the IP address to CIMC

Hi,in my case: CUCM 9.1 +

Hi,my advice: stop