Running ISE 2.4, i am unable to create a report that includes the called-station-id fieldIt is not in the columns available for reporting.Is there a way to report on this AV pair?Can AV pairs from auth logs be exported via syslog?Much appreciated-Eri...
We have ISE 2.2 with WLC's running 8.2 and WLAN running mab.I want to put certain devices connecting to this WLAN (using identity group/mac-address) into certain WLAN interface.I have tried using Airespace:Airespace-Interface-Name = <name of interfac...
Syslog is great, but it is much easier in a pinch to see log messages right in console/buffer.
Is it safe practice to use the maximum log buffer size shown in Cisco IOS and IOS-XE?
-3850 running 3.6.6 shows range of value for `logging buffered ` a...
I have a Cisco 819 with 4G which is a "spoke" and has a layer 3 DMVPN connection to the "hub."
This (C819HG-4G-V-K9) router does not support EIGRP, therefore I cannot establish adjacency to the DMVPN "hub." It is hearing eigrp hellos over the tunnel...
Create a new ISE deployment on the version you are moving to, migrate all settings and get that deployment working exactly as you need it, then migrate your NADs (e.g WLCs, Router/Switches using TACACS) to use the new AND the old deployment. There is...
From https://community.cisco.com/t5/other-wireless-mobility-subjects/controller-keyhash-matches-with-the-mse/m-p/3377668 richard wakefield explains the workaround. enable option 23 on MSE
Invoke the setup script in the MSE:
/opt/mse/setup/setup.sh...
I opened a TAC case for an issue with some nexus 7k's unable to complete configuration archive.
My engineer, after multiple weeks without response, has recently linked me to this EoL announcement which indicates that PI "data center" will be going e...
Hello Alex,
I am concerned with the deployment of 3702i wireless APs and the dynamic channel assignment in my environment.
The controller (8510/7.6.130) is configured with the default settings for RRM and DCA, and the APs in dense areas (such as ED i...
