Hello,
I'm pretty sure this is not possible, but would love to be proved wrong, or an alternative solution be available.
We have Cisco 5508 WLC with nearly 500 APs. We are about to provide a managed WiFi service at a remote site and will use th...
Hello,
Apologies if this is in the wrong location. I work in the public sector and so our user base is pretty big. Currently we use locally significant VLANs per switch cabinet with port-channel uplinks to the Distribution layer. We are thin...
One of our sites has requested a fairly simple Auto Attendant. 1 for sales, 2 for finance 3 for warehouse etc etc.
Warehouse are not always by the phone and so have a mobile (GSM) phone. Getting calls from an external number to this mobile fail...
Hello,
I require some help/advice.
We have a stack of 3750, which is the default gateway for all our Vlans. The gateway of last resort pointing to our external Firewall is 10.62.0.5 We are in transition to use another firewall from a different v...
Hello,Our standard phones have been the Cisco 7911 and 7941/2. They are now eol and we have started to purchase the 7821 as and when required.On the 79xx series when you begin dialling a number on the phone menu it will provide you with a list of n...
Hi Mikey Boy,
We do have Prime, but did not think that would be a viable option. thanks for the pointer of using the Virtual domain. I will look into this further.
Their current WLC are end of life, and I think they do not want to loose the ...
Hi Seb,
Thanks for the reply, unfortunately, it is not that easy. Each building/floor will have multi-tenants, some will be our internal staff, some will be staff on a different domain (that we control) some will be external staff from other public...
Ethernet Disconnected, is usually down to a loose PIN on the Ethernet cable at some point between the currnt phone location and your Switch. Have you a Fluke or cable tester. some will tell you if there is a break in each of the 8 wires, some wil...
Given that your current callmanager is under support, there is no cost associated with upgrade to 11(.5). There will be for labour costs, for your 3rd party engineer and project manager and other services they may provide.I believe firmware updates...
Is this happening just for you or everybody in the business ?
Do you get the time stamp of when the voicemail was left ? What has changed since then ??
When we upgraded from 8.6 to 11.5 voicemails from 8.6 where no longer available.
regards
Da...