Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
So staring in 2014 an SMB who wants a Cisco UC Voice solution (Phone Systems specifically) must spend about 10K list for the system plus phones and a switch minimum for up to 25 phones....At those prices Cisco is effectively pricing themselves out o...
I am looking to Cisco to pehaps add the following to the entire line of RV series VPN capable firewalls. (at least the RV110w) Add EZ_VPN, with ability to store remote usename password for tunnel auth.Add option 150 in the LAN DHCP configSupporting m...
Hi,is there a waty to pervent some phones (endpoints) from making outbound calls (like the phone is in a public lobby or on a showroom floor) and you can call othr extensions , just not outside?thanks
This seems to happen a lot:Change a config on a phone button, or add a user to a paging greop, hit apply config, you get this message with a greyed out "Apply All Change" button;Your changes have not been applied to the device.You can continue to mak...
So I configured a SIP trunk from les.net for testing, Trunk works, can place and recieve calls...However if I disconnect the WAN port cable and wait a min and plug the cable back in, the system reboots along with all phonesalso for a office with a p...
I just upgraded a Uc560 today, takes about an hour depending on Voicmail size etc. usth the CCA with the 8.6.1 software pack, (I am suprised Cisco has not release an update , they usually do this time of year for UC500 series)It has the firmware...
I agree there are many examples of Cisco changing the product scope, IMHO way too many examples, I can name a bunch. The pitfalls of having competing product development teams and no true unified voice strategy in the small business marketplace.I pus...
So in 2011 the SBCS roadmap showed Project PAYTON as being supported on the UC500 and UC320 product line, here's the linkhttp://www.ciscoevents.hu/smb/webexeloadasok/archivum/doc/SBCS%20-%20News%20and%20Roadmap.pdfCisco needs to support this as promi...
I do not see this resolved with any combination of software on the system and the phones, I have 5 clients having similar issues, and the best we get is, it works sometimes but once connected they still get drops in the audio (packet loss)If I use ...
So what I read above is correct, but in the "Real World" one sometimes has to do what is required to make the sale, CCA does not seem to parse any SIP configurations and I use it along with CLI SIP configurations, I have done this with SPA8000 ATA'...