Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I am wondering if anyone has faced this. I have random 2702i access points crashing on this version of the software. I don't see any bugs listed that could cause this and I didn't have the issue on the previous version of 8.5.161.0 I am not...
Does anyone know how to access support files and downloads for a used device when a device is already on contract with a different company? Seems Cisco is unable to support a device and will not allow me to purchase a contract because the device is ...
Hello, I am trying to upgrade the firmware on some BE6M-M5 servers. From what I understand, these are c220 m5 servers, but trying to apply the firmware regardless of the version results in a soft lockup as seen in the image. Any ideas what is wrong...
I am wondering if there is any way we can reduce the number of disconnects of clients when they are roaming over flexconnect ap's? 5520 Controller 8.5.1402802 WAPsWindows 10/Ipad's/Android Phones/IphonesFlexconnect Local switching with Central Authen...
Hello, I have an odd issue which I have not been able to solve via TAC or otherwise. When I connect a VMWare ESX host or a Cisco switch to our 4507R+E SUP 7L-E switch using etherchannel and plug one cable into line card 1 and one cable into line car...
Opened up a case with TAC. This is what they came back with. "---- Partial decode of process block ---- Pid 47: Process "Dot11 driver "stack 0xA862F04 savedsp 0xA865C78Flags: analyze prefers_newStatus 0x00000000 Orig_ra 0x00000000 Routine 0x018B14E...