Hello everyone,
Yesterday we upgraded from CER 10.0 to 10.5 and now CER isn't tracking our phones configured in CUCM. The configuration for CUCM cluster is unchanged, tested AXL connection and it's working, network connectivity appears to be ok to ...
Is anyone aware of an automated method to update a users Alternate Extension field with LDAP information when importing users into CUC? My current method is exporting users with mailbox, updating the alternate extensions and then re-importing but th...
Has anyone created a custom RTMT Alert for ServerUP to complement the ServerDown alert? I'm getting email notifications for ServerDown alerts every almost every night but by the time I'm able to verify connectivity it's back to normal operation. I ...
Recently one our 7606-S devices was unexpectly shutdown due to loss of power. When this device returned online, all the OSPF neighbor adj started flapping. Our debugs shows that the OSPF process is establishing a Full neighbor state with each neigh...
Hello Everyone.. racking my brain the past few day or so trying to figure out why a certain model SFP is giving us some problems with outgoing packet drops.We're utilizing a WS-3560C-8PC-S switch with IOS 12.2(55)EX3, SFP in port Gi0/9 is a GLC-FE-10...
Well I deleted then re-added the CUCM configuration and restarted the Phone tracking service on CER. Took about 1 hour but it has now discovered the devices from UCM (about 2000) and appears to be reporting correctly now.
For the past few weeks I was unable to login to jabber because after I would login then another login prompt would request my Webex IM credentials, I would try to input my credentials again, try to reset my password (which unable to do because it was...
Hey Kevin,
In case anyone makes the same mistake like me, it may be worth adding under the Call Back Number (ELIN) section that the 913XXX CTI RP will need access to a CSS that can reach the internal phones.
I was testing our PSAP Call Back functio...
Hey mmilligan11,
Were you able to find a solution this issue? I was just presented a very similar requirement. I've been able to mask all pstn calls as anonymous but any internal call to our "Anonymous Hotline" displays the users caller id display...
Check out your SIP UA config section. You have a SIP registrar configured which is causing your phones to attempt to register with a SIP Proxy/Registrar server.
