Hi!! We are working on a mapping between a Sponsor Group in Cisco ISE and a user group in Active Directory....but the client wants the mapping to be through a RADIUS SERVER, for avoiding ISE querying directly the Active Directory. I know it is possible to use a RADIUS SERVER as an external identity source for ISE.....but, is it possible to use this RADIUS SERVER for this sponsor group handling? Thanks and regards!! ... View more

I want to use a 5508 as an anchor controller for a wireless guest deployment....but the client has internal 4402's controllers, with software version 7.0.235.0...is it possible tu mix these two controllers for a Wireless Guest Access Deployment?? Thanks ... View more

We're implementing a project with Cisco ISE; but the Guest Portal appears to users as an "untrusted site". For solving that, a Public Digital Certificate must be installed in Cisco ISE, for it to send it to the users who enter the Guest Web Portal. Now....for selling me the certificate, VERISIGN needs to know the ISE parameters for the certificate, such as FQDN, names, subnames, etc....how can  know these parameters from ISE? Thaks a lot!! ... View more

Hi!! We have a UCS C220 M3 server, with a 1 TB SAS HD and an embeded RAID controller, like this: 1 UCS-HDD1TI2F212 1TB   SAS 7.2K RPM 3.5 inch HDD/hot plug/drive sled mounted 1 UCSC-RAID-ROM15 Embedded   SW RAID 0/1/10/5, 4 ports SAS/SATA If I add this RAID PCI card controller to my UCS server: UCS-RAID-9266CV= MegaRAID   9266CV-8i w/TFM + Super Cap USD   1,686.00 Will it work with it, ignoring the former embeded RAID It has configured? The issue is that WMWARE is not supported my RAID embeded controllers, so I'd like to add an external RAID PCI controller for supporting VMWARE. I'm not sure if it's gonna work. Thanks!! ... View more

Hi fellows!! As you might well know, for the DMS solution, the DMPs can take a video streaming from an IP multicast address in the LAN, as part of their playlists. My question is: How to inject the videoconference into a multicast address in the LAN? I mean, is this configured in the TCS? In the VCS? In the CUCM?? For example, in an scenario where I have 200 Codecs in the LAN....how will THE FINAL USER configure which of those videoconference streamings is to be injected in X multicast address?? The DMPs will be configured to take the videostreaming from that X multicast address....but emphasizing...how will the user configure WHICH STREAMING to place into that address?? I hope I'd made my point...thanks a lot and best regards!! ... View more

I know that having the same Power Supply is not a restriction for implementing VSS....but I'd like to know if, in your field experience, there is any issue regarding this difference in Power between both chasis (both of them having the same components). Specificly, one chasis has 2 redundant power supplies of 4000W and the other chasis has 2 redundant power supplies of 6000W. I ran the Cisco Power Calculator, and 4000W would be enough for each chasis....but one of them has this 6000W supply. Thanks & Regards!! ... View more