Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is Jabber in phone-only mode supported in SRST mode? I know that this has been asked in some other threads as well, but has not been replied clearly.In the SRST datasheet, a restriction, that the the Presence serve should be reachable, is mentioned....
The NAT configuration guide ( https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/ipaddr_nat/configuration/xe-16/nat-xe-16-book.pdf) mentions the following as one of the restrictions (on page 25)
> NAT outside interface is not supported on a VRF. How...
OSPF to BGP ROUTE DISTRIBUTION WITH ROUTE-TAGSWhile working with a customer, I came across an interesting issue that I thought is worth sharing. The customer is having Firewall in LAN, with which CPE router is having OSPF peering. Usng 32-bit dotted ...
When a call to Unity Connection is made from an unknown extension, a ID and PIN is asked, if default configurations are used in CUC. The ID normally is the extension number. Is it possible to change the voice-mail box ID to the user alias (as seen in...
Pages 22, 352 and 353 of the following document mentions the scenarios for the consumption of RMS license
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/expressway/admin_guide/Cisco-Expressway-Administrator-Guide-X8-8.pdf
Regarding the Rich ...
If you use an ACL in a route-map permit or deny clause, and the ACL denies a route, then the route-map clause match is not found and the next route-map clause is evaluated. The above is stated in the document: - https://www.cisco.com/c/en/us/support/...
Cisco API Reference Guides are available at https://www.cisco.com/c/en/us/support/conferencing/meeting-server/products-programming-reference-guides-list.html You can have a UI created that have suitable interfaces for the actions that you want your u...
Hi Azi,What type of LAN device are you using? Does it support NBAR for application identification? If yes, then you can match protocols in the ACL for classification If you don't want all the packets destined to NMS to be classified, you can use a co...
Thanks Haris!For point 3., it would work when we only have CME where the Jabber clients would register. For "The host machine of the Jabber client is configured to point to Unified CME that is configured as the DNS Server", there are a few challenges...
Thanks! - Is there a need to change the way DNS SRV records are configured, for CME to work as SRST for Jabber clients? - If no, then will it work for the Jabber clients that were not logged in at the time SRST was triggered? I mean, will it work onl...
