All,We are currently running ACS 3.3 on a Windows 2003 member server of our domain. It has become necessary for the server administrators to upgrade our domain controllers from Windows 2003 to Windows 2008. Since we have no interest of running ACS ...
We are currently in the process of switching ISP's from one to another. I was hoping that I could, with the Cisco ASA 5510, run both ISP's in tandem without having to do a "hard cutover" of changing IP's of all public facing devices on a weekend. B...
I am looking into methods of redirecting HTTP traffic and other high bandwidth protocols for users that are browsing the web to another ISP (Comcast Business) that has a much higher bandwidth than our existing tier 1 business ISP. Our configuration ...
We have a few employees using Mac OSX Macbook Pros (like me) that rely heavily on utilizing the Cisco VPN Client (v4.9.01). Roughly two months ago all of us seemed to start running into issues where our Macbooks would not negotiate DHCP addresses fr...
Currently we have three IPS sensors consolidating all of our information into MARS and it is working quite well.The question that I am wondering is if anyone has a suggestion for what is the best practice for tuning signatures at the IPS appliances a...
I wasn't sure if you have found resolution to this but I suspect that your VLAN718 is suspended due to the fact that it looks as if VLAN 718 is not on the "Allowed VLAN' list of your local device or perhaps missing from the vPC peer link on one of th...
Here is an example of how we have it on our MGCP dial peers.dial-peer voice 999010 pots service mgcpapp answer-address .T port 0/1/0!dial-peer voice 999011 pots service mgcpapp answer-address .T port 0/1/1!dial-peer voice 999012 pots service mgcpapp ...
I have a similar issue with the Cisco SSL clientless VPN and Windows 8. All of my Windows 7 and Windows XP machines can connected and RDP fine, but Windows 8 maches disconnect (wired and wireless) regulardly using the ActiveX RDP client. The Java c...
Thanks for the quick response on this.I too think it may be a L1/L2 problem so we are starting there. There are currently 4x 10GE ports, in two port cahnnels, from a VSS 6509 to the new UCS-A and UCS-B FI. Right now all of the data is running over...
