About Scott Fella

Scott Fella · 03-24-2023

I think having links to specific Cisco YouTube Channels would really help folks that visit the forum. This way, the Cisco team also has visibility and can read and answer questions. Example, the Wireless team has https://www.youtube.com/@getunplugge...

Scott Fella · 12-14-2022

I have a four node ISE 3.2 cluster in Azure, two PAN+MNT and two separate PSN's. My plan was to migrate off our old ISE 2.2 in our DC eventually. Currently I have migrated all our TACACS+ to our Azure ISE cluster with no issues. I started to test ...

Scott Fella · 06-11-2021

I'm running ISE 3.0 and and older version of ISE 2.2 which I have ran into some rbac issues. On ISE 3.0, is it possible to provide menu access to view the policy sets but not make any changes? I tried a few different ways, but seems to either allow...

Scott Fella · 02-16-2021

I want to understand if I can install ISE in a Hyper-V cluster using Storage Spaces Direct Hyper-V cluster, or would I just implement individual Hyper-V instances? The plan initially is to have 4 nodes, two PAN/MNT and two PSN's. There will be loca...

Scott Fella · 09-18-2020

I just inherited Stealthwatch 6.10.5 all on VM which includes one of each of the following: smc, flow, udp. I now need to renew/update the existing certificates that were installed. I have renewed the existing certificates and have all three in a ....

Scott Fella · 02-22-2025

That really shouldn't be, because, like in the US, max TX for indoor on 2.4GHz is 100mW/20dBm. Keep in mind that when external antennas are used, you can obtain higher EIRP combining a higher gain antenna and TX power. This is used in the outdoor sp...

Scott Fella · 02-21-2025

What you are seeing is max TX power, but that is dynamically adjusted per regulatory regulations. If you look at the Transmit power and receive sensitivity in this document, you can see what the max power level for the AP, but you also have to know ...

Scott Fella · 02-21-2025

Since you are using Meraki, what I can say is you can create templates for each site where an SSID is mapped to a vlan. If you want to use dynamic vlans, then you need to look at this:https://documentation.meraki.com/General_Administration/Cross-Pla...

Scott Fella · 02-21-2025

Not having access to download images is the biggest problem folks have and one of the biggest gotchas that make them mad. It's hard to have a Cisco environment and no support which allows you to download images, because eventually, you will need to.

Scott Fella · 02-21-2025

Scanning happens anyways. If your ap has been up and online, you should already see "Rouge" ap's without having to tinker with additional setting. If you scan on 2.4GHz only, then you know that that radio will only scan on that band, not others. St...

Member Since	‎02-28-2002 05:58 PM
Date Last Visited	‎02-21-2025 08:10 PM
Posts	27,020
Total Helpful Votes Received	18937

User Statistics

User Activity

Why not have links to specific Cisco YouTube Channels

EAP-TLS to Azure ISE is failing but not with an ISE node in the DC/LAB

ISE RBAC for Policy Set so team can view but not edit

ISE in a Hyper-V cluster using Storage Spaces Direct Hyper-V cluster

Stealthwatch replacing existing SSL certificates

Re: C9117AXI-H Power Level can not set to datasheet guaranteed

Re: C9117AXI-H Power Level can not set to datasheet guaranteed

Re: NPS

Re: Cisco AIR-AP3802I-E-K9 subordinate

Re: Rogue/aWIPS deployment for C9130AXI-EWC-K