Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,On a lot of our switches we utilize GLBP for load-balance and failover. We use Ciscoworks LMS 2.6 to monitor the network devices. The problem I seem to have is that when we use GLBP Ciscoworks complains that the interface is down and unresponsi...
Hello,I understand you can do a GRE/L2TPv3 tunnel (router to router) and get multicast through the tunnel. But is there a client based software to appliance VPN that will allow to do the same? If Cisco doesn't make one who does?
I have configured PBR on a 3660 router to route local traffic outbound to 2 different pix firewalls that sit in front of this 3660 router. I have 4 t-1 sites connected behind this 3660 router (all 2611 routers). Now the problem isn't routing throug...
I had a question possibly not unity related but so i get an Outside caller and the caller is routed to unity for the opening greeting. From there the caller knows if he dials DN 103 he will get 103. But I want to put a block on DN 100-150 from inbo...
I have setup a pix in my lab before i go live with it. I setup the outside route and the nat and it worked fine from clients on the inside accessing the internet. But when i configure the VPN and SSH connections im not routing outside from the clien...
Cisco says you can. How I have it configured is a vlan per sub interface. Ethernet over L2TPv3http://www.cisco.com/en/US/netsol/ns588/netqa09186a008009d4ea.htmlQ. What are the main applications of Ethernet over L2TPv3?A. * Ethernet Trunking: enabl...
Thanks for the reply Lindborg,I have that audio text application which i can't live without. The problem in my situation which never is simple is that i have DN from 150-200 which inbound callers are allowed to talk to. So if i locked down the 1 ke...
Yes, the Static command was my issue with the outgoing access to the Internet. Do you guys know of a better config I can use, Im all ears for any advise. Or am I on the right track.I really do appreicate both of your help.
I don't need to go outbound from VPN Clients. Sorry i must have not been clear enough. Inside Interface 172.16.1.1Client Behind 172.16.1.2 (not VPN'D client)When i turn on the VPN settings and SSH settings my client behind interface eth1 can no lo...
