Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm totally new to mpls so I'm a little confused as to why I can't get to the internet with what I have configured. I am not using bgp, just ospf and I can ping within the vrf but not to addresses on the internet. When I do a trace from the firewall...
One of our sites lost power this morning. When the power came back on, the router did not. The tech on site looked at the router and saw that the power switch was in the off position. He turned it on and it came up just fine. Does anyone know if Cisc...
Is there a way to automatically synchronize the configuration between two HSRP routers? TFTP would work fine if there was a command that you could issue that would leave the HSRP configuration alone. Obviously this is a problem because you end up wit...
Adding the PSN to the ip helper list on the SVI fixed this problem I was only seeing with raspberry pi devices. DHCP is working full circle now for all of our devices!
This does also happen on 9500s. I have a pair that rebooted due to a memory leak bug and DAD didn't come back up. At least when I upgrade the ios and reboot, hopefully the DAD links will come back up! Fo2/0/23 DAD link to Fo1/0/ notconnect 4094 full ...
Hi Edgar, I have one simple question. 802.11w had a vulnerability a while back and the button was greyed out so it couldn't be enabled. Now that the button is back, is it safe to enable 802.11w?
Hi Edgar, I have one simple question. 802.11w had a vulnerability a while back and the button was greyed out so it couldn't be enabled. Now that the button is back, is it safe to enable 802.11w?
