Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I am attempting to create a WMI on c9800 controller. I had used the pre-installed MIC (CISCO_IDEVID_SUDI) on 16.10.1 but upon upgrading to 16.12.4s, I am now unable to use this trustpoint.Via the Gui, I no longer have a list of trustpoints to sele...
Hi,I was hoping someone could advise on the inventory collection process and whether the Telnet/SSH credentials are required to have full access to the device in question or can Read-Only suffice? (In this case, a wireless controller) Thanks, Jerome
Hi, We are running 8504 WLC on 8.5.140.0 with Prime Infra on 3.7.0.0.159. The number of client associations recorded by Prime appear inaccurate and when checking an AP in Prime, it will show a number of client associations that are over 4 months old...
Hi,If a client moved across a L3 boundary and their lease expires, will they renew their address from the vlan associated with the anchor AP or will they obtain a new address from the VLAN tagged on the hosting AP?Any explanation would be appreciated...
Hi,
I am currently trying to troubleshoot why a 3802i is staying in a low powered mode even with a 802.3at PoE injector attached. It is a deployment of around 12 APs with 6 of them remaining in that state.
Logs on the APs show CDP PSE negotiation tim...
Has anybody identified what is meant by CWA is not working? Also whether load balacing is meant by placing server within server groups or configuring load balancing across server groups?
Thanks for your replies.I actually found what seems to be a bug - CSCvr03501 - On 9800-40/-80/-L GUI, wireless mgmt interface should only list non-default LSC in cert menu Appears the option should be blank as MICs are used a default. If i go to Moni...
Thank you again.Why i asked was determine whether a reboot is still required after uploading the Oui.txt file?We are currently on 8.5.151.0 so updating the OUI as an interim measure due to change management when performing software upgrades is quite ...
