Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
We have an ACS 5.8 server with evaluation license & we've backed-up the configuration. Then the evaluation license expired. Would it be possible to copy the backup config to another machine with a new evaluation license?
Thanks!
Hi,
I'd like to ask recommended configuration on the ASR9K facing the ME4605 OLT, If the Services configured is either Bitstream or Unicast.
As both services usually use QinQ.
We'd like to assign 1 /24 IP address on 1 sub-if but several ONUs/ONTs wi...
Hi! I'm having a problem with my mVPN Configuration. Also the Multicast doesn't seem to work intervlan. Hoping someone can help me with this one. Thanks!
RP/0/RSP0/CPU0:ASR9010-1#show mpls traffic-eng tunnels auto-tunnel p2mp Mon May 30 15:17:21.10...
Hi, We have a CUCM 10.5, configured as local route-group and with Sip Trunk connected to our VGWs. Both Voice Gateways are in the same subnet and same Device Pool. 1 is on our Old Building (so to capture the calls of the numbers that are still on the...
Hi smiltea,
Thanks for this info.
so that means I can use the ff:
0GBASE-CU SFP+ Cable 7 Meter, active
SFP-H10GB-ACU7M
10GBASE-CU SFP+ Cable 10 Meter, active
SFP-H10GB-ACU10M
10GBASE-AOC SFP+ Cable 1 Meter
SFP-10G-AOC1M
10GBASE-AOC SFP+ Cable...
Hi Viniit,
Yes, some multicast IP like 235.1.0.8 has been up before. But the source is the on the other end And this router was the receiver then.
Is there a way to tear down the auto-tunnel that was created?
Thanks!
Regards,
mazzy
