Hello ,I need to deploy 2 nodes for call recording using Compliance Recording and i have some questions:is it mandatory to use Enterprise SQL ?how does clustering works? Active Active or Active standbycan i use network recording option (using phone’s...
hello ,
is there any way to turn off auto transmit video for IP Phones 8865 from Cisco Call Manager?
i need the call begins as audio call first then escalated to video by the user if he wish.
Hello Dears ,
we have Cisco router 3900 series and i need to configure this router as Call Manager Express to control SIP IP Phones.
this router has E1 circuit to provide PSTN connection.
is there any limitations of using SIP protocol for PSTN connec...
hello dears ,
if we have two domains, internal domain called internal.corp and external domain called external.com for Example.
All internal A records for all virtual machines and SRV records (_cisco-uds & _cuplogin) for jabber was created in interna...
Hello Dears ,
as per cisco expressway basic configuration deployment guide V 8.9 page 59 : clustering > The LAN interface that you use for clustering must not have Static NAT mode enabled. For these reasons, we recommend that you use LAN2 as the exte...
Hi Anurag,I could not understand the following statement:Peers which are configured as TURN servers must be reachable using the private addresses for their corresponding public interfaces.Is that means the CMS should reach the expressway turn server ...
i understand that both expressway E NICs will be in DMZ zone but with two different subnets. correct?
if i used dual NIC deployment with single firewall, is this deployment will be supported as i cannot see such deployment at any cisco document?
thanks a lot Jaime ,
so, if i used public IP directly in express way Es. there is no need for NAT Reflection?
is there any way to use Dual NIC static NAT deployment with single firewall?
BR,
Essam
