Dear All, I configured a SIP trunk with RP, RL and RG when I call to the other site which is Huawei PBX Calls from Huawei PBX to CUCM is working fineConnectivity is WAN Issue: As I initiate calls from cisco ip phone I get a Busy Tone and call gets d...
Dear all,
We changed ip schema of all buildings but in one building the 6921 ip phones are not getting registeredwhen we place a different model on the same port like 7945, 7965 the phone gets registered and starts working only 6921 ip phones are no...
Dear all,
I am having a call manager 8.5 and a gateway I configured an ATA 186 in cucm and gave an extension to it, now from fax device, I connected this ATA
Fax machine is sending the faxes but we are facing an issue in incoming
what configuration...
Dear all,
I am having a call manager 8.5 and a gateway I configured an ATA 186 in cucm and gave an extension to it, now from fax device i connected this ATA
Fax machine is sending the faxes but we are facing an issue in incoming
what configurations...
Dear all,
We have 3 CUCM Servers and a VG, 4 E1 lines, 1000 DID numbers, whenever we are receiving a call on this numbers it's getting delayed or getting drop, It's taking around 20-24 seconds to connect
Below are the dial-peer configurations fo...