About j.a.m.e.s

j.a.m.e.s · 09-03-2024

Does anyone know if this model of switch would ever support 1Gbit optics, via QSA/CVR-QSFP-SFP10G?At the moment the latest 9500X models (C9500X-28C8D and C9500X-60L4D) only support 10Gbit or above according to the transceiver matrix.

j.a.m.e.s · 08-02-2024

I'm seeing a few references to carrier-id and how it could match a dial-peer either outbound or inbound (e.g. Page 12 in BRKCOL-2314).Could anyone explain please:1. What is the format of this carrier-id or cid tag? Is it a SIP header inside the INVIT...

j.a.m.e.s · 04-19-2024

Could someone tell me where is the best place to globalise the called party from the perspective of a phone please?I am migrating to E164 and would like to know if this could be done at the device pool level using transformation patterns.e.g. If a us...

j.a.m.e.s · 04-01-2024

I'm preparing to migrate our CUC from SCCP -> SIP, but I'm struggling to work out how CUC uses the following settings (most are on the SIP Trunk).Inbound Calls CSSRerouting CSSOut-of-Dialog Refer CSSDiversion Header Enabled inbound and outboundCallin...

j.a.m.e.s · 03-26-2024

Can a translation-profile applied on an incoming DP influence the match of an outgoing DP?My use case is a CUCM sending SIP INVITEs with 8 digits in the To field, but I would like to configure the outgoing POTS dial-peers using an E164 destination-pa...

j.a.m.e.s · 09-04-2024

Good question and several years on I still can't see sufficient info around the CUBE14-T-ENH licenses. I also can't find any of these part codes on the Build & Price tool. It's also not stated whether these licenses are meant to be counted as a 'conc...

j.a.m.e.s · 08-15-2024

Disappointing to see this is still not implemented in 2024 on Jabber v14.1 for Windows.

j.a.m.e.s · 08-07-2024

Here is a LUA script to add the Carrier ID into the VIA header on CUCM -> CUBE messages: --[[ In CUCM, you MUST specify a parameter of "carrier" (e.g. carrier=colt) This script will append ;x-route-tag="cid:carrier@next-hop" to the VIA header. --]...

j.a.m.e.s · 08-07-2024

Luckily @Jonathan Schulenberg posted a old Cisco Live slide (shame on Cisco for removing this vital documentation).Carrier ID takes this format: x-route-tag="cid:carrier@next-hop" and is part of the VIA header.Example: x-route-tag="cid:colt@10.1.1.1"...

j.a.m.e.s · 06-11-2024

Doesn't web-deploy require admin rights on the client? We leave the web-deploy in our config but ultimately deploy an upgrade via SCCM. As @Marvin Rhoads implied earlier, the installer seems to take care of migrating smoothly from old versions. It go...

Member Since	‎09-07-2002 03:43 PM
Date Last Visited	‎09-17-2024 02:33 AM
Posts	293
Total Helpful Votes Received	157

User Statistics

User Activity

9500X No Support for 1Gbit

CUCM and CUBE - What is carrier-id/cid

Best way to Normalize/Globaliz Called Number to E164

CUC to CUCM SIP Integration Trunk Settings

VGW Translations and Dial-Peer Selection

Re: Difference between CUBE14-T-ENH and CUBE14-T-STD

Re: Jabber for Windows "move to mobile"/ "send to mobil

Re: CUCM and CUBE - What is carrier-id/cid

Re: CUCM and CUBE - What is carrier-id/cid

Re: AnyConnect 4.10 upgrade to Secure Client 5.x