Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have this feeling the answer is NO, but its worth the try. Is there any IP/VC video gateway capabable device apart from a 3500 series IP/VC gateway such as network module or blade that we can install on a 2800, 3800, 7600 routers? If the answer is ...
In the process of installing a WS-X4148-RJ45V blade onto Cat 4507 running 122.20.EWA IOS version.Currently we have 2 x WS-X4515 Supervisors one Active and other Standby. We also have 4 x WS-X4448-GB-RJ45 baldes installed already.Now i want to install...
3845 12.3(11)T7Currently have 3 x E1 PRI terminating for Outbound and Inbound on our 3845.I have configured 3 x Preference POTS dial-peers for redundancy/load balancing purposes.Not sure why, but my first preference POTS dial peers Outbound Status is...
Hi,Just wondering what is the reason for seeing the following for monitor session 1 being the SMS?sh monitor session allSession 1---------Type : Service Module SessionIs this normal behaviour in my config i dont see anything which r...
12.3(11)T6CM 4.1(3)If we have our 2851 configured for H323 while dialing from IP Phone to a PSTN user either extension of the IP phone is displayed on Cell Phone or the Caller ID under the H323 Config page on CCMAdmin is shown.But if I configure the...
I am having the same problem your experiencing. Seems like we are hitting DDTS CSCec70390 which should be fixed in 6.3(4).The bug is still DE pending as i still seem to be experiencing the problem after upgrading the PIX.Cheers!Yavuz
Thats fine! I think i figured the problem out. Let alone the dial peers down Our E1 controller is DOWN :-(.Currently investigating the problem. Under the E1 controller receiving the following "Receiver is getting AIS". From what i can gather seems to...
