Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have the VSOM and VSMS installed on a server and everything seems to be fine but the Axis camera I have installed just shows that the 'Server is Unreachable" and doesn't display video. I know the camera is okay because I can web into it from the S...
We have configured Multicast routing on 3550-EMI Core Switches as well as CGMP compatibility for our 3548XL L2 edge switches. Currently Multicast imaging works in most of the clients LAN locations. However at one particular site they are having mass...
I have a unique situation I think and I have been beating my head on the wall for a few hours so I figured I would let you guys chime in.We are replacing a Pix 515 with an ASA 5520. So far so good the clients are working. However I cannot get manag...
We have recently moved a large client from a flat network structure at each site ( more than 30 total sites) and an unstructured routing plan from edge to core. They now have a structured WAN that coincides with their LAN Structure. Since we comple...
We have a client using an IWATSU phone systems with IP cards int it. The clients config is like this; (Remote Site) Phone Switch | Ethernet Switch | Cisco 2811 (VPN Tunnel) | INTERNET | Cis...
Recently had to re-build my Visio system. Downloaded all the stencils again and I also ran accross the Add-on off of the Cisco Site. From what I can gather this is what it does.Once you have a drawing open and you have added a stencil or created on...
Robert,Not sure if this helps but I ran into the same behavior. I had to no out the VPN client command on the 5505 then re-apply the config.no vpnclient enablevpnclient server x.x.x.x.vpnclient mode network-extension-modevpnclient nem-st-autoconnect...
Colin,I saw your post and figured I would give you a shout. I have a client with a 7K installed. We are running ACS 4.2 and all network equipment is functioning with the exception of the 7K.We keep getting:TACACS-3-TACACS_ERROR_MESSAGE: All servers...
Not sure if you have resolved you issue yet or not but I stumbled across this thread as I was dealing with the exact same issue.For me is was one of the RAM modules in the Secondary Sup. I am in the process of RMA'ing the unit now. To test this I s...
We just did an install for a client yesterday.ons15454.k9.R853.pkgAll XP systems worked great.OSX worked GreatVista cannot complete the download via java.Java version is JRE 5Any thoughts?
