Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys!
Is there any way for the SIP 7940G to send SIP Option message or keepalives?
Setup is 7940g <-->NAT <--> PBX
As checked,it only sends REGISTER message every 1 hour, and no SIP OPTION or keepalive which we suspect the reason why the conne...
Hi! I would like to ask if there's any way to force a 7940 SIP converted phone(Non-CUCM) to send a Keep-alive or SIP OPTION Message?As we've monitored it only sends REGISTER then, that's all, no OPTIONS/Keepalives from the phone that's why its droppi...
Hi! We do have a voice gateway that needs to monitor a some debugs, But, every time we enable the debug, the VG crashes and needs to reboot.
Is there a way for the debug messages/logs will be forwarded to a server? Like every debug output will be f...
I do have 2 dial-peers, the scenario and configuration is here.
dial-peer voice 11 pots description T6000 to ROW (US) destination-pattern 0011T progress_ind setup enable 3 progress_ind progress enable 8 translate-outgoing called 8842001 port 3/0:D ...
Hi Everyone,
Our 3750X port goes into err-disabled due to reaching mac-address limit but the show mac address-table is not showing enough mac addresses to reach this limit. Meaning, for example the port-security limit is set to 10, and the show mac t...
Hi Paul,
This is appearing on multiple random ports.
We have done all those. We don't want a workaround, we want a solution to this problem. I'm looking into upgrading, but i've never seen a bug similar to this.
Thanks!
For radius nac, It's on the NAC State then select RADIUS NAC right?
Got some problem enabling it since when I enable it, it says
"Radius NAC is available only for WLANs that are configured for 802.1x/wpa/wpa2 layer 2 security or open Auth + MAC Filt...
