03-18-2008 02:28 PM
I know this can be done with the following configuration:
controller T1 1/1
framing esf
linecode b8zs
channel-group 1 timeslots 1-12 speed 64
pri-group timeslots 13-24
However, I cannot seem to find documentation on it on www.cisco.com. Any help would be appreciated.
Thanks
Von
03-20-2008 04:34 PM
Can anyone help me with this?
03-20-2008 04:37 PM
If you telco can provision that, there is no problem, MGCP won't even know what are the unused PRI timeslots for.
Hope this helps, please rate post if it does!
03-20-2008 05:51 PM
right, I know that it will work. What I need is some official documentation indicating that it will work and is supported.
03-22-2008 04:30 PM
Cisco does so many things that is not that you can find confirmation about each and any variation in configuration.
What you want to do is really nothing special and works since some 10 years now. Some people calls it "integrated T1 access"
04-09-2008 09:51 AM
ATT calls it SINA Prime digital service.
controller T1 0/0/0
framing esf
linecode b8zs
channel-group 1 timeslots 1-12
ds0-group 2 timeslots 13-24 type e&m-wink-start dtmf dnis
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide