06-27-2005 05:54 AM
Hi,
We are getting the "temporary failure (41)" cause code on some calls - can anyone explain what this means.
Cheers
06-27-2005 06:32 AM
This generally means that one or more of the resources needed to complete the call is not availible. (DSPs, bearer channels, ip connectivity are resources that can cause this if they are unavailible).
Hope this helps.
06-27-2005 06:40 AM
We have had problems with DSP`s on the router and i was going to upgrade the code to a new version to see if that helps. We aren`t losing any Ip connectivity as the interfaces stay up - could it be related to QoS parameters?
Thanks for your help
06-28-2005 03:10 AM
BTW - this is a sample of a call which drops out. It seems to bevery random indeed
2772 : 24366195hs.4090 +361 +1609 pid:35 Originate 359352519
dur 00:00:12 tx:448/8797 rx:408/7819 29 (temporary failure (41))
IP 10.35.10.1:18496 rtt:531ms pl:4460/240ms lost:0/2/0 delay:53/53/70ms g729r8
media inactive detected:n media contrl rcvd:n/a timestamp:n/a
2772 : 24365528hs.4091 +1029 +2316 pid:6 Answer
dur 00:00:12 tx:408/7819 rx:567/11177 29 (temporary failure (41))
Telephony 4/0/1 (4092) [4/0/1] tx:8060/6130/0ms g729r8 noise:-65dBm acom:50dBm
07-21-2005 06:36 AM
Hi,
what type of router and IOS do you use?
If it is a C3745 you can try the 12.3(6c) IP Plus, which we found is the most stable apart
from a crash bug.
regards Ulrich
04-03-2014 07:17 PM
Hi,
I'm also experiencing this problem, AT THIS incoming links showing
"(41) Temporary Failure"
No Router
dial-peer voice 10000 pots
description Entrantes Pela E1 0/0/0
incoming called-number .
no digit-strip
direct-inward-dial
port 0/0/0:0
!
dial-peer voice 10001 pots
description Entrantes Pela E1 0/0/1
incoming called-number .
no digit-strip
direct-inward-dial
port 0/0/1:0
!
Any suggestions?
06-20-2019 06:05 PM
I ran into this same error code in June 2019 CUCM 10.5.2.
This error code is very generic and is basically useless.
Problem: No one could call a new user. Rang a few times then fast busy. Error Code SIP/2.0 480 Temporarily Not Available.
After wasting many hours troubleshooting "network connectivity" issues it turns out that someone checked the "Call Forward Unregistered" checkbox on the user's DN. The user had a Jabber CSF setup (didn't even know it) and it was unregistered thus forcing all calls to Voicemail. The user had a no Voicemail Profile in place and the default profile was to block access to voicemail. All calls to the user would ring then fast busy.
Once I gave the user a good voicemail profile then calls to the unregistered CSF rang through to voicemail.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide