I have cli postview working. I would like to save the changes off to a txt file. I find them usefull for learning and training.I cannot figure out how to cut and paste from the Postview window. I am running windows XP.As always, any help will be a...
Hello everyone,We are deploying a UC560 NFR in our company as demo kit and we are facing an issue.When connecting the IP Phones CP=521_524SG on the UC560, we have the message "downloading XMLDefault.cnf.xml" on the phone's screen permanently!!! The p...
I know this should be simple, but I unable to find the correct combination. I have a fax line that comes in a FXO port, which is directed to an FXS port which has the analog fax machine connected to it. The inbound works fine. What I am struggl...
hi,I am getting this error message on the CUE every 10 secs. How do I stop this message appearing this meessage? Message details-A87B0z 0x802BE3B0z 0x802C1050zAug 26 03:01:00.655: %SYS-3-TIMERNEG: Cannot start timer (0x8645B0A8) with negative offset ...
I have a UC560 with 7942/62 phones. Internal and external incoming calls will randomly yet often go busy. This install has been up and working for several months and this issue started this afternoon... Thoughts?
We have a customer that wants to have their voicemails go to their exchange email box. That is not a problem. They do not ever want to listen to their voicemails on their phones. Is there a way to automatically delete the voicemails after 5 days? ...
I have been the disgruntled owner of a UC520 for one year now. I have gone through five IOS upgrades and eight - yes count them 8 – CCA upgrades and still the most basic configuration of an intercom does not work. If you are simply trying to apply...
Two questions regarding multi-site setup-1. Is there a limit on the number of UC5x0s you can have at different sites?2. Can you mix UC520, 540 and 560s at different sites and have them work together?3. Is there a limit of how many SR routers that can...
Hello!Just had a question regarding an external DHCP server for a UC 540. I have added the "IP helper-address" command to "Interface BVI 1". Everything works ok, my computers get a dhcp address but as soon as I try pinging from CUE out to the in...
Hi again,Having some problems with a 7911g phone and 7931g phone.I have attached a video file to show exactly what is happening on both the phones.I have other 7911g phones plugged into the network and they work fine.I also tired factory resetting th...
I have fax-to-email onramp service working well to multiple users on the UC540 system. My concern is that I currently have found no mechanism that will automatically delete the fax messages from the fax users mailbox in CUE. Is there an alternative...
I have SPA504G not finding its cnf file for some reason. Its across a VPN, the phone was registered successfully at the headend. Theres full connectivity over the VPN back and forth. I do a debug tftp packets on the UC560 and get this output. I'v...
Does this card support wink start? I see the T-1 signaling does but i see not command under the FXS ports for wink start signaling. UC540(config)#voice-port 0/0/1UC540(config-voiceport)#signal ? groundStart Ground Start loopStart Loop StartVIC...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: