Natting a network on UC560

[jef_rat72]

We have two sites with the same subnet, 192.168.1.x /24.  Want to create a point to point VPN between the two.  However the side we control has a UC560 in place.  The only traffic needed over this VPN is from a server, 192.168.1.250

Now on an ASA I know you can nat only the server traffic,  192.168.1.250 to 172.16.1.250, which is then allowed over the VPN.

However, can a UC560 handle this?  It looks like a UC560 can nat, but then it nats ALL 192.168.1.x traffic, you don't seem to be able to specify only the server (192.168.1.250) traffic.

Am I missing something or will we have to change the network addressing on our side?

[paolo bevilacqua]

You have to renumber one side. There is really no way around, even if the UC500, being an IOS device, can do all the NAT functions that an ASA does, and some more.