UC540 compatibility with VWIC3 card?

[Hiromichi Kawanobe]

Hello all,

We have a customer using a UC540W-BRI-K9. They will move their office and upgrade their current 2xBRI lines to 1xE1 in order to have 30 channels.

as you may all know, the VWIC2-1MFT-T1/E1= is now EoL/EoS. Will the new model VWIC3-1MFT-T1/E1= be fully supported and compatible with our

UC540W-BRI-K9? It is running

Software version is a bit old though...

!!!!!

Cisco IOS Software, UC500 Software (UC500-ADVIPSERVICESK9-M), Version 15.1(2)T4, RELEASE SOFTWARE (fc1)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2011 by Cisco Systems, Inc.

Compiled Tue 12-Jul-11 22:01 by prod_rel_team

ROM: System Bootstrap, Version 12.4(24r)SB, RELEASE SOFTWARE (fc1)

KFL-UC-01 uptime is 26 weeks, 4 days, 14 hours, 11 minutes

System returned to ROM by power-on

System restarted at 22:33:37 CET Thu Jul 12 2012

System image file is "flash:uc500-advipservicesk9-mz.151-2.T4"

!!!!!

Thanks for your advice.

[Kevin Monteiro · Accepted solution]

Hi Hiromichi,

As per UC540 platform reference guide, VWIC3-1MFT-T1/E1is not supported.

VWIC2-1MFT-T1/E1 is the only supported card.

http://www.cisco.com/c/en/us/products/collateral/unified-communications/unity-express/C78-557768-00_540_platform_reference_guide_DS_v2a.html

Kindly Rate the post accordinly.

Regards,

Kevin

[Hiromichi Kawanobe]

Thanks Kevin for your prompt answer. Then we will definitely need to go for the VWIC2.

Kind regards