With enable secret set I can no longer access CCA 3.1(1)

[m.castrigno]

In config mode I enable secret password, now when I attempt to connect in cca it prompts me several times for the password which I provide, starts the software but shows my router as "Unreachable:Authorization Failed"

How can I fix this?

Thank you!

[mzaccone]

Is the user password the same as the enable secret?  Make sure they are the same as CCA will only ask for the password once so they must be the same.

[m.castrigno]

After i login via telent how do I change the user password?

Thanks.

[Alexander Maroukian]

Hi Matthew,

if your user is e.g. "admin" then go to config mode and do the following the password should be the same as the enable secret.

(config)# user admin priv 15 password thesameassecretpassword.

HTH,

Alex

*Please rate helpful posts.

[m.castrigno]

Thank you!

[David Trad]

Hi Matthew,

It should also be noted that if you change the user/pass via CLI and not with CCA, then you will most likely need to delete the community and recreate a new one to that UC, otherwise you may not be able to connect properly.

Cheers,

David.