Hi Everyone, I know that we can config DPD on Anyconnect SSL on cisco ASA.Need to know can we config the DPD on VPN client on your PC also? RegardsMAhesh
I installed the anyconnect secure mobility client 3.1.05152 version on a couple o windows 8.1 workstationson my home network.There are no restrictions from my firewall towards the outside world.When i try to connect for the first time i get the certi...
Hi guys, We have noticed the 'pool-member' command that is used in the 'vpdn-group' (when command 'request-dialin' is used) is no longer available in ios 15. It is available in ios 12. It it used to link a dialer to the vpdn-group. Was it move...
Hi,I have a tunnel between our office and colation facility. All external http/s traffic enters the firewall in our office. I need to redirect http traffic entering the outside of the office ASA to the webserver located in the colo over the existing ...
Hi Everyone, If ASA is config as Active/Standby failover.If Active ASA has VPN image,profile and plug-ins will this will also replicate to standby ASA?or I have to manually do this on standby ASA? Regards MAhesh
Hi everyone,User PC is config with VPN client for remote access.Say client pc has config of VPN client with backup servers and if primary ASA is shutdown will the secondary VPN gateway issue the client new IPaddress automatically?Here ASA is not i...
Hello, I have an issue with the Cisco AnyConnect Start Before Logon module. I have narrowed down the cause of the issue, and hopefully this isn't super eclectic and someone can help me. The issue is, the SBL module does not start up on first start ...
Hi Community, We have the following: IPsec VPN clients terminating at ASA. ASA authenticating VPN users against RSA server for token,user/pass via ACS using the SDI protocol. RSA checks the user database in AD. We want to restrict the VPN users to a ...
Hello folks!I have a setup between two Cisco ISR routers, running IOS 15.1(4)M3. I have tried to establish DMVPN connectivity with two VRFs (ie. two tunnel interfaces per router) between the routers and it mostly seems to be working as I expected. Bu...
Has any one been able to access mapped drives using the smart tunnels under the clientless ssl vpn. I have tried allowing explorer.exe, net.exe, net1.exe in the application list. But it still doesn't work. Has anyone ever tried this ?
Can all of the domains of an organization be handed out to the VPN client when it connects automatically? Is this something that has to be managed by every user?
AnyoneI have the following scenarioASA5505 with some servers on the inside, I access the servers from outside with static NAT, use on offical IP per server, and just allow the neccesary ports, I do a DNS rewrite for access to servers by FQDN from the...
Greetings All,I have an interesting situation:Our Cisco VPN (ASA 5510) with RDP or windows file sharing works great in the United States. However, when traveling to our other office in the Netherlands VPN connects, but I cannot RDP into servers/work...
I have a tunnel connected between an RV042 (remote) and ASA 5510 (local network), but I can not ping, see or connect to any of the local network servers. Using the VPN client, I can connect to the 5510 and be able to see all of the servers on that ne...
