VPN

Hey guys, I think I am a little over my head here but trying to get some resouces to look over. Basically we have an IAD being handled by our ISP that is doing NAT and DHCP, I am wanting to drop our ASA 5505 right behind it and use it strictly for VP...

I have a client ipsec vpn set up to an asa5510.  There is a mac that is using this via the built in mac ipsec client.  They will get disconnected after a period of non-use of the vpn.  Then they are not able to reconnect until after multiple tries.  ...

  Hello,I've a problem I've not encountered before.I need to set up a VPN tunnel from an ASA 8.4 to a cloud provider, the problem is the IP address of the server in the cloud isn't fixed, it's a domain nameIs it possible to use a static nat to a FQDN...

Hi,Can someone tell me how to fix this issue? I think it is CA server issue. I configured a 2800 router as a CA server.ThanksJul 10 18:40:46.834: %CRYPTO-5-IKMP_INVAL_CERT: Certificate received from 103.13.13.86 is bad: CA request failed!Jul 10 18:40...

Hello,If I configure a user that is authenticated against AD and they can use the IPSec client to connect to 2 different ASA (both part of the same MPLS network and both authenticate against the exact same AD) can I limit the IP addresses this user c...

Is there a way to do Spoke-to-Spoke Direct Communication using Easy VPN client at the remote sites? I've searched all over and can't find any good examples. I'm using ASA's at all locations.Thanx,-Tim

I have a L2L VPN with a pair of 5515's running 9.1.1 in Active/Standby as the remote VPN peer.  I can get management traffic (ssh, snmp, radius, tacacs+, syslog) for the Active ASA to go through the VPN by using the "management-access inside" command...

My datacenter is using a Sonicwall 2400 and my remote branch office is using a Cisco 1841 I am trying to get the Cisco 1841 to connect to my Sonicwall 2400 using L2TP/IPSEC with PSK VPN.Below is my router config but i still can't get it to work, can ...

So after working with smb-level products for a couple of decades, I've gotten to a point where I can finally justify enterprise class equipment. Now, the problem is which one?  In the ASA 5505 data sheet there's at least 9 different part numbers with...

I have a L2L vpn between a 5515(hub) & remote site w/ 5505 established, however, at the hub there is another network range which is routed via the same gateway. The interesting traffic as well as the nat statement is defined with an object-group that...

Hi,I have an issue when trying to set up IkePeer association between HostE and CISCO 2951 using certificates.I have on the HostE certificate retrieved from SCEP server. CISCOs certificate is signed by OpenSSL machine.So on HostE I have installed cert...

Do you know the procedure of import SSL certificate from Godaddy to ASA 5510? attached is the drop-down list that I have to choose fromThanks,

Hallo,can i implement a double certificate authentication on the Cisco ASA?First Auth:Machine certificateSecond Auth:User certificate + RADIUS(OTP)or:First Auth:User certificate + RADIUS(OTP)Second Auth:Machine certificatemfgMichael