I'm wanting to send only certain traffic across L2L VPN, not everything. The setup is from my home (ASA5505) to the main office (ASA5510). For example, I'd like to send all SSH traffic from my LAN across the VPN. I've tried setting this up with ...
HI all,I configured a site to site IPSEC tunnel between ASA5510 (site1) and sonicwall (site 2) . The ipsec tunnel is established and I can ping two subnetseach other. I am using ASA5510 as the gateway for voip. ie I gave the ip of voip provider in s...
I'm desperate here. I've been troubleshooting an EzVPN connection for too many hours now...Setup:- 2821 as server- 1811 as remote- Using virtual template on both sides- Both boxes running the latest 12.4(24)T4 imageProblem:No matter what combinations...
am not able to connect to VPN on LAN. I checked the check box saying "Allow LAN access" but still i cannot connect.We need vpn to connect to client n/w even when in office.vpn connects fine if i use some data card or wifi connetion but if fails wh...
Hi,I am using Cisco AnyConnect VPN Client Version 2.5.0217.I usually work on customer site, and if customer has proxy server for internet access, after connecting VPN, I am not able to surf on the web.I can only visit intranet web addresses, not exte...
Hi all,pls support me with the following problem.I installed a new software (it is a software which allows me to generate reports from a GPS Laptimer on my motorbike) on my PC.OS XP SP2.I installed the software and everything went well.Now after rest...
i'm trying to remotely connect into my cisco 1841 router. i want to be able to ssh/telnet into my router from the internet on my blackberry device, i installed a ssh client on my BB, had my carrier provide me with a routable ip address, setup port fo...
Hello, we are currently working on moving from a pre-shared key model for VPN access to using certificates. We will have a CA running and all internal machines will have a computer certificate auto-enrolled. My question is there a way to create a PCF...
Hi,I experience a stronger problem when I try to open and forward ports 8866 for Geovision on iphone and port 5733 for ultravnc on the Router 800 IOS Security.I do theses commandesaccess-list 112 permit tcp 192.168.2.200 8866 80.X.X.X eq 8866access-l...
I've searched and found a few ideas on this subject and still no luck after trying them all. I have my vpn users authenticated through active directory and am simply trying to accomplish single sign-on through the RDP plug-in to a Server 2003 box. ...
Hi Experts,Need help in setting up ezvpn. I have a Cisco 2801 with the following configuration:router version 124-24.T3 (advanceipservicesk9)crypto ipsec client ezvpn BOS-BACKUP connect auto group bosnsw key clar3nc3 mode client peer 202.47.85.1 xaut...
I'm kind of a Cisco rookie and need help setting up a VPN:I replaced a Netopia R910 with a Linksys RV042. I duplicated the settings the best I could. I'm trying to re-connect the site-to-site VPN from our network (192.168.0.x private, xxx.xxx.109.2...
I am an ASA newbie. I have an ASA5505 that is connected to the internet and VPNs to a 3030 VPN concentrator which connects to the main LAN. The ASA has the following VLANs:VLAN2 - outsideVLAN1 - inside (10.84.36.1)VLAN3 - insideeast (10.84.989.1)Th...
Hi,My corporate laptop, Windows 7 64-bit, is connected to the head office using AnyConnect 2.4.0202 to a Cisco ASA 8.0(4).Once connected I've been unable to query all non-A-type records. And because Active Directory heavily relies on SRV records for ...
