Hi all,I'm trying to get my VPN client up and running and we're told that Anyconnect is the only xp64 viable option. It seems to install ok buy when I login it tries to install the updates and throws back a 'Fatal Error' message, not supplying any ot...
Upgrade a pix firewall. Everything was running, VPN?s, etc. UP graded to version 7 an now I?m seeing this %PIX-3-713042: IKE Initiator unable to find policy: Intf 1Now the VPN?s that we have are all active, everything is running. So, what is this mes...
Hello,I have a LAN to LAN between PIX 7.0(4).2 and one 2811 with IOS.We are using the ipsec tunnel for voice, and some calls are dropping after one minute.I can see the following message from PIX when calls get dropped : 713042 : IKE initiator unable...
I have setup a Cisco ASA to allow VPN using a client. I have one user who is on a Mac who doesn't get dropped at all and uses the connection every night. I have another user on Windows who gets dropped every 5 minutes. The Windows users is using the ...
When i try to install the vpn client i allways have this error when i try to compileMaking modulemake -C /lib/modules/2.6.31.5-0.1-desktop/build SUBDIRS=/download/temp/vpnclient modulesmake[1]: Entering directory `/usr/src/linux-2.6.31.5-0.1-obj/x86...
We have a branch office which is connected to our HQ through IPSEC VPN all traffic are encrypted. Clients machine are able to access the resources on the HQ the problem is they are not able to connect to the Internet, as a workaround we configure the...
We are having problems accessing some static NATted IPs over a VPN. After doing some research, we learned you need to exclude traffic destined for the VPN from the static NAT using a route-map. So we did this:10.1.1.x is the VPN IP pool.access-list ...
Our current VPN is IPSec based with several SOHO sites connecting to corporate via IPSec tunnels. The routers at these sites do not have GRE capable routers. However we would still like to try to have connectivity between spoke sites using the corp...
Is is possible to get some sort of accouting information from an ASA on Site-to-Site VPN's? I'm particularly interested in the amount of data flowing through different VPN's, preferrably in some format other than total packets like I get for RA VPN ...
Hi, today we had a strange problem with one of our 5550. I was working via ASDM on it and suddenly I could not connect to it via asdm over the management interface or the inside interface. Nothing helped.When I connected with a vpn and then use asdm ...
I recently bought a cisco asa 5505 firewall. I conected it to my home network ( directly to the cable modem ). I am assuming that I need to assign the outside interface a static ip address to have VPN access correct?. After I assign the interface a s...
Hello,We previously had a pix 506e which suddenly would no longer power on, we pay a 3rd party company to periodicaly backup our firewall config so we were able to purchase an ASA 5505 from them and have them restore our config to the 5505. Everythin...
Hi all - hope someone can help.After testing many things it still not working :-(Here is my little desk setup..And my ASA setup see attached file..My problem is that the client can't access anything on the inside also the other way around:- no ping V...
HI,I used SDM 2.5 to configure a site to site VPN from my 2811 to a branch office rv802. It almost works!2811 network is 192.168.10.0/24; rv082 network is 192.168.1.0/24From the rv082 LAN, I can access anything behind the 2811, but traffic originatin...
