VPN

gusy i m pretty new to this....i have a question infact series of questions which relates to IpSEC....my understanding is that IPSEC (plz correct me if i am wrong) is an open standard......IKE is a negotion protocol of IPSEC......IPSEC has three main...

Tried to configure LDAP to check if the computername exist in the AD container without luck, any suggestions?Oystein

the scenario is shown in the diagram with the description. Please write us.the diagram is attached in the message below

Im trying to make a configuration with fake public adresses to a VPN IPSec (site to site) and this is my config can you please tell me if sothing wrong with it thank u.And i have a question what should i do more than configuring the two CISCO 2600 r...

Hello all.I have installed Cisco VPN Client 4.6.00.0045, every so often when I try to connect it, it prompts for the username and password, which I enter, then it appears to try and connect but nothing, I have left it and left it for over 1hr at time...

I just read about the Cisco 3002 Hardware Client and was excited as it met my needs for remote access Lan to Lan connectivity. Then I found out it is discontinued. Is there a replacement product.

I have a Cisco 1811 at a SOHO office. It has 2 router ports and 8 switch ports. Currently one of its 2 router ports is connecting with an ADSL ISP and another one is disabled. A GRE/IPSEC VPN is setup on this Internet connection to the Head Office. I...

All,Can anyone know how to clear the state table without rebooting the device.I am sure there is a command as i have tried once before but not getting it back.

I am trying to get 2 inside interfaces on a PIX 515E to talk to one another. (These networks need to have any-any type connectivity to each other)I know on 7.X all you should have to do is create them with the same security level and do a:same-secur...

Our company just got the Samsung i325 Ace mobile phones with the data plan. I can tether my phone via usb to my computer and get onto the internet just fine, and I can even connect to my vpn with no problem. That is where my troubles begin though. As...

We can't install the client from Microsoft's SMS server. Even if I just use SMS to open a command prompt (CMD /K) and then manually start the install from the original downloaded source, the installer hangs while "gathering information". However, i...

Dear Pros,Please find below the problem i am facing in one of my project.The inside network 192.168.1.0/24,after the remote vpn client conected he can not access the exchange server in this network with ip 192.168.1.2. The user telling that the remot...

At this forum I've read an article "Remote Access VPN clients on LAN IP range" and tried what they suggest but with out success.I have the same request from customer they want that VPN client have IP address from LAN IP range. There are exception tha...

I've successfully setup remote VPN connections to my ASA using vpnc as the client and everything behaves as expected. I'm trying to test the official Cisco client and I'm unable to make the same SSH connections across the VPN as I was using vpnc.The...