Hello,This seems like it should be easy to do, but here I am. I want users to connect to our VPN via the Cisco Client 5.0.01.0600 and AFTER the connection launch a script. The end result being they receive their mapped drives. I know about the Netlog...
I have a site to site vpn from an 877 to an 1841. Everything works fine for the VPN but I am having problems with allowing access from the internet to internal servers on the LAN attached to the 1841.If I add an ip nat inside statement for a service ...
HI, Has anyone sucessuflly configured this? I've been attempting to configure LAN-to-LAN and am close. Very few commads on the WRVS4400N and so many on the 3030.
I have situation where half of my network is connected with one central location and other half with second central location. Every router is connected with primary frame-relay link and ISDN as backup link (floating static route conf).I need to confi...
do you guys know of a good link that can walk me thru on how to setup an ASA5510 as a Remote VPN Server?I will have users connect to the office from the road using the cisco vpn client. I need split tunnel as well because I only need to encrypt their...
I am having a problem creating a tunnel between a ASA5520 running 7.2 are there any quirks or anything special about setting up the tunnel with the sonic device
Okay, here's hoping someone here can help me (and that this is the correct forum for it). I have a client with a 2811 router. It's running 12.4 advance security. He's running public IPs behind it and at some point I'm going to have to set up BGP f...
We currently have a IPSec tunnel between a pix 515 in our main office and a 2801 router at our branch office. The tunnel appears to be having fragmentation issues (problems sending large packets through our network), which is causing several of our ...
I'm trying to figure out how to get the email proxy to work without much success. I accept that I might not get it to work with the iPhone but I'm having trouble seeing much activity at all. Anyone have a guide for configuration, including recommen...
Is there any way to implement Multi-factor Authentication with an SSL VPN in client or clientless mode? I would like to use my RSA server as secondary auth, but can't seem to locate any info on how to do this. Thanks for the help.Jay
Hi,I need to turn the rules of firewall checkpoint to a Cisco ASA. I have NAT rules, where so much is modified the origin as the destiny in a packet. But not as to implement it in the ASA some idea to make it? Thanks
HelloDoes anyone know if there is a limited number of secured routes that you can give a vpn client?Im testing my lab pix515E 6.3.3 with new vpn profiles/acl and encounterd this problemI have created a object-group (network) for the secured routes th...
All, I need to enable multiple ports (some in a range) so outside Video Conferencing Equipment can access by VC.How do I allow the ports below using my access-list command? Is there a range command?access-list acl_out permit tcp any host 64.171.51.2...
