VPN

Hello good people!I'm having trouble using the secure desktop with port forwarding and SSL VPN client. I have configured port forwarding as required and it works fine with secure desktop disabled. When I enable and switch to the secure desktop the "S...

Ok, I need some help. I'm sure this has something to do with the lifetime, but I can't seem to figure it out. I create a LAN-to-LAN connection from my vpn 3000 to a 1721 Cisco router using a VPN Module. I set up both the IKE SA and the IPSEC SA o...

I have ADSL connection and I get my IP address via DHCP from my ISP. Is there a command to enable auto discovey DNS on the ATM interface to pick which DNS server to use from my ISP?

I am having difficulty in transmitting data across a "connected" VPN tunnel. I believe certain ports may be blocked by an ISP (i.e port 500). I need info on what ports a VPN uses, and if Cisco makes a router that has port selectability for VPN applic...

Can someone tell me how to configure DPD( Dead Peer detection ) within the webinterface of my Cisco 3015 ?

- I'm trying to segment my internal network and have my internal servers ie mail, file etc. segmented from my inside/client network. All this is in place with everything open. I would like to know if there is a "master list" of default ports which ...

Can you please tell me if PIX 535 supports hairpinning? How do you configure the VPN concentrator using just one (1) interface connecting to PIX 535, instead of using both public and private interfaces connecting parallel to the PIX 535?Thanks,Phil

We are facing a problem while connecting Siemens MC35 GPRS modem to Cisco3640 router through Serial A/S interface the problem is that the chat-script can not start with the modem Here is the output error followed by the configurations:‘NOTE The same ...

Im looking for a detailed overview of the adsl alcatel wics that are preinstalled in cisco 837s and their electrical operation with DSLAMS. Can anyone guide me in the right direction?

Hello,i have one pix acting as hub and three pix as spoke. On one link i have pppoe on the outside interface. The ipsec tunnel get an MTU of 1492 while the other end at the spoke have an MTU of 1500 for this tunnel. Anyone who knows if there's a way ...

Hi,having great difficulties in making these 2 hardwares establish a tunnel. The PIX is running 2 other tunnels already and is having no problems there. The remote-client has recently changed to a Sonicwall VPN 3030and now the tunnel will not work. I...

I understand nat-traversal in the PIX world, and NAT-T in regards to IPSec. I have a customer that is trying to establish a VPN tunnel to another network, with no success. Shouldn't all I have to modify is the inbound ACL on the outside interface to ...

I want to know what is the meaning of V3 or V2 in WIC cards i.e.WIC-1B-S/T-V3 ==> wat is V3.WIC-1B-U-V2 ==> wat is V2.Thanks

Hi all,could someone help me if its possible:We have 2xPRIs and 2x NM-30D in our RAS.Its possible to configure calls comming from one PRI to first NM with digital modems and other calls to second NM.Thanks for advice.BRjl

Hello all,I have maybe very basic questionbut I have studied a lot of guidesabout configuring RAS with ISDN interfacebut Im not still sure how to build somereasonable solution. Could someone help me with this:1.)what configuration commands I need to ...