VPN

We are currently trying to establish a VPN to a client or ours but without great success. We are testing the connection from our PIX 515 and have their shared secret but cannot test all of the time as our PIX is in service. Is their something we co...

Good afternoon,I have a couple of questions on setting up a VPN on a PIX 515. We currently have VPN setup (a vendor set this up) where 4 of us in the office share a username/password to access the network. I would like to be able to setup multiple ac...

I have a working PPTP VPN in place with a PIX 515. Is there a way to limit a particular public IP address (a vpn client) to only be able to access one particular subnet in the enterprise? I can't quite figure out what combination of configuration l...

hi, is there a command in IOS that allows encrypted traffic to bypass the external access-list of a router. I only want the ipsec ports in the external ACL - I do not really want to list the remote and local encryption domain in the acl.Thanks in adv...

I have multiple clients setup on a lan to lan via a vpn concentrator. I would like to have the remote sites talk to each other. I have thought about the gre tunnel approach, but wanted to know if there were any other ideas.Thanks,aaron

Can my site client able to surf net once VPN established?,I'm using the Cisco EZVpn feature because one of my site do not have fixed IP address.

I have a VPN setup between a PIX 515E and PIX 515. THe gateway router has 2 interfaces going out. One is a data T1 (which all traffic is going to) and the other is a PTP T1 coming from my site. I was wondering how to send traffic across that inter...

VPN Client verHow do I restrict access to VPN clients terminating on a PIX firewall. PIX has multiple subnets, and I would like certain users access to specific hosts.

Hi hope you can help. I have a vpn 3020 concentrator with the private interface being terminated in a DMZ of a pix.I have configured the concentrator with a local pool to give ip address to vpn clients. This works fine and I establish a tunnel and ge...

We allow VPN access in that assigns connections a 10.1.2.x address. Once VPN established, I would like to know how to enable these clients RDP access into 10.5.0.0, 192.168.1.0 and 192.168.2.0 networks. I know its something simple that I am missing...

I have simple VPN configuration on my PIX. With only group access no local or xauth authentication. Some clients can connect fine. Some are unable to. The clients who cannot, they connect to my other PIX VPN with no problem.here is a log from of the ...

Hi;I have a vpn box cisco 3015. the client has cisco vpn client v3.5. Every aplications are working very well. But, I have one problem with MSN messenger, doen't establish the connection with the server. Have Anyone had this problem?.Thanks Sergio Un...

Currently have both site-site and remote client VPN's off of one pix. Works fine for access to inside systems. Since PIX is not a router remote vpn clients can not access systems hanging off the remote side of the site-site VPN.Quseiton is if I got...