I installed VPN client 2.5.2 on Windows ME and when I try to connect through the 3000 concentrator, I get an error saying 'IPSEC service not loaded'. Is this client compatible with Windows ME?
We are looking at a VPN box which can take care of Access VPN as well as Site to Site VPN. We are looking at 500 Access VPN users and 100 Site to Site VPN. Which is the ideal box to take care of both VPN's. Can a 7140 VPN box take care of this requir...
I have a 3005 VPN Concentrator. I can get WIN95/98 and NT4 users to logon and browse (Web and Server), however, WIN2k users can establish a tunnel but cannot do any form of browsing. We are using the 3.0.1 client. I have tried everything I could t...
I have two routers each connected to two providers (running BGP) providing redundant VPN routes. I also want to add a PIX for security and proxy of internal users. Is the best way.... to create a subnet that an ethernet interface of each BGP router a...
I just bought a VPN module for my 1601R router. I'm not sure what IOS is on the router. DO I need anything else? If I have the module will I need a new IOS?
Well I need to implement VPN for my company,I have a 2610 a PIX firewall 515 and VPN client Software, I dont want to use VPN concentrator. I believe we can do the tunnelling without VPN concentrators. Where will these clients terminate ....on the rou...
Hi,after Installation of the VPN-Client 1.1, the binding of the IP-protocol at the embedded nic is lost. I can bind a new IP-protocol at the nic, but after restart, the binding is again lost. After uninstall of the VPN-Client, the IP-binding at the n...
I set up a vpn on the dmz. It is working perfectly now. I need to add extra security commands, if any on the pix for this vpn link so to protect against the vpn device itself and my internal network. Need suggestions, Thank you.
Hello,I am new to networking, but have been given the task of improving VPN performance at my office. We are a small company (12) who mostly work from home. We have a DSL connection and a 675 Router at the office. Behind the router is our server t...
Hi, we have a client that wants to connect via the public Internet to a branch office in another country. The branch only has a connection through a cable ISP, and they can give him a public IP, but they will NAT from the inside of the cable (10.X.X...
We are using the vpn cleint to connect to our intranet as interem fix untill we get on the company backbone. Sometimes I get an error when I start the vpn client "The Ipsec service could not be started and remote connection to the IPsec server could ...
I am the Lan Admin for a small bank. We are currently running Netware for our network ,but are planning on migrating to WIN2000 soon. We are looking for a cost effective solution for a small VPN that would allow some of our staff to work from home or...
