cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1306
Views
5
Helpful
2
Replies

Sip Trunk directly from webex calling cloud to cucm 11.5 on premise

GidonAniz29947
Level 1
Level 1

Hello guys.

 

There is a way to configure directly  Sip Trunk between WEBEX calling and CUCM  on premise?

 

Thanks

2 Accepted Solutions

Vaijanath Sonvane
VIP Alumni
VIP Alumni

Hi @GidonAniz29947 ,

It is not possible to configure SIP Trunk directly between CUCM and Webex Calling. You need supported Cisco ISR CUBE Router. Please check below articles:

https://help.webex.com/en-US/article/jr1i3r/Configure-Local-Gateway-on-IOS-XE-for-Webex-Calling

 

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.

View solution in original post

Hi Vaijanath Sonvane.

 

Many 10x!

View solution in original post

2 Replies 2

Vaijanath Sonvane
VIP Alumni
VIP Alumni

Hi @GidonAniz29947 ,

It is not possible to configure SIP Trunk directly between CUCM and Webex Calling. You need supported Cisco ISR CUBE Router. Please check below articles:

https://help.webex.com/en-US/article/jr1i3r/Configure-Local-Gateway-on-IOS-XE-for-Webex-Calling

 

 

Please rate helpful posts and if applicable mark "Accept as a Solution".
Thanks, Vaijanath S.

Hi Vaijanath Sonvane.

 

Many 10x!