Webex Calling & 1100 ISR

[Carlos Melo Romero]

Has anyone been able to configure webex calling using a Cisco 1100 ISR as a Local Gateway? specifically ISR 1121

Regards!

[csrlima]

Wich licenses do we need to order for isr 1100 act as webex local gateway ?

[Nithin Eluvathingal]

 What trouble are you facing ? 

When using Cisco 1100 make sure you are on  IOS-XE 16.12.2 or later. 

[Vaijanath Sonvane]

Hi @Carlos Melo Romero,

I do not have ISR 1100 Series CUBE router but I have been using ISR 4351 as local gateway in my lab environment and it is working fine. Below is my setup:

Verizon Network <--SIP Trunk--> Cisco 29XX <--SIP Trunk--> CUCM <--SIP Trunk--> Cisco 4351 <--SIP Trunk--> Webex Calling

I have followed below resources to configure Local Gateway and CUCM:

1. Cisco Webex Enablement Lab v6 on dCloud (to configure Local Gateway)

https://dcloud-docs.cisco.com/c/r/dcloud-docs/sites/en_us/collaboration/webex_enablement_lab_out/b_webex_enablement.html?dc=rtp 

2. YouTube video

https://www.youtube.com/watch?v=vYu1bEz_4Jk

3. Configure Unified CM for Webex Calling

https://help.webex.com/en-US/article/nqqzbk7/Configure-Unified-CM-for-Webex-Calling-

I hope this is helpful.

[dtibbe]

I've been using a vCUBE up to now and it was working fine..
At wich point are you struggling?