cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
447
Views
10
Helpful
3
Replies
Highlighted
Participant

Connecting Cisco IOS AP 9100 to Mobility Express Controller

Hello, how can I connect AP Cisco 9100 with software version 16.12 with a Mobility Express Controller version 8.10

Which is the procedure?

Thanks

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Advocate

Re: Connecting Cisco IOS AP 9100 to Mobility Express Controller

3 REPLIES 3
Highlighted
Hall of Fame Master

Re: Connecting Cisco IOS AP 9100 to Mobility Express Controller

It should be the same as any other ap as long as the ME and the AP is supported. The release notes should have the information on compatibility on software version and instructions. If you place the compatible 9100 on the same management and the AP has the correct image, the ap should be able to join.

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/810/release_notes/b_ME_RN_810.html#me-supp-ap
-Scott
*** Please rate helpful posts ***
Highlighted
Participant

Re: Connecting Cisco IOS AP 9100 to Mobility Express Controller

I know that Cisco AP 9100 is compatible with ME 8.10 as a subordinate AP, but if the AP has IOS-XE version 16.12, how can I migrate the AP before to AireOS 8.10 so that it can join the ME controller? how can I change the AP firmware from IOS-XE to AireOS?

I understand that the Cisco 9100 witch ISO-XE 16.12 will not be able to join a ME controller

Thank you

Highlighted
VIP Advocate

Re: Connecting Cisco IOS AP 9100 to Mobility Express Controller

Content for Community-Ad