10-27-2016 09:44 AM - edited 07-05-2021 06:03 AM
Community,
We've used 3602's for some time now, and have configured them to leverage a user name and pass to authenticate to the network switches via 802.1x vs force authenticating the network ports for the AP's.
We've recently started to deploy 3802's and are not able to get them to authenticate to the network.
The controller supports this configuration, and we can't find anything that says the 3802 won't support this as a change.
Does anyone have any idea if somethings changed? or something special to get this working again?
Thanks,
10-27-2016 10:57 AM
We just took a look at the 8.2 release notes and it states it is not a supported feature on the 3800 series along with other x800 series.
http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/crn82mr1.html
10-31-2016 06:36 AM
Seems like it will not be supportet in 8.2 and also not in 8.3.
11-01-2016 12:28 AM
Just got the info, that it will be back in a later release in about a mounth.
04-11-2018 02:06 AM
hi
we are in 2018, april, and it seems it is not available even in version 8.5 ?
cannot believe that it's been removed
any idea if this feature will be added ?
04-11-2018 02:09 AM
GREAT, if it is finally comming ..
04-11-2018 08:27 AM
It seems now supported in WLC 8.6 bus this version doesn’t work on a WLC2504.. arghhh... Cisco.. what the f@#%^k. Anyone tips how to make this work?? (wlc2504+2802i)?
04-12-2018 04:52 AM
04-12-2018 05:20 AM
Thanks, i already came to the same conclusion that using MAB or completely disabling dot1x on the port is the only option for now..
04-12-2018 05:23 AM
04-19-2018 02:02 AM
I've created a TAC case and contacted our Cisco sales representative so let's hope for the best. If anyone that whishes to use this feature creates a TAC case we maybe have a chance..
11-28-2018 10:38 PM
Did you get any response from TAC on this?
01-03-2019 06:17 AM
It appears that they are finally doing something about this in the 8.7 release. And rather than just having username/password you will actually be able to use cert based auth (EAP-TLS / EAP-PEAP). Fingers crossed it actually works there, we're still on an 8.5 release and it doesn't look like there are any stable 8.7 releases at this point.
01-06-2019 11:14 PM - edited 01-06-2019 11:16 PM
Last comment that i got from Cisco sales is that they suggested that i should buy a new WLC, for example the 3504.
01-07-2019 12:08 AM
Great. So don't fix it, just buy new.... Not a great answer !!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide