04-03-2013 07:38 AM - edited 07-03-2021 11:49 PM
Need help with the following config..
I currently have one 5508 controller that is configured with 2 WLANS..one is a guest WLAN and the other is used by internal clients
via authentication back to our AD. This all works fine.
In total there are 32 AP's that broadcast both of these WLANS. Ideally I would like only a subset of these AP's to broadcast both WLANS as I have 10 AP's in a public area that only need to broadcast the guest WLAN.
Am I able to configure which WLANS each AP can broadcast ?
Any help would be appreciated.
Cheers
Dave
Solved! Go to Solution.
04-03-2013 07:48 AM
yes. The feature you need to look into is call AP Groups
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
04-03-2013 07:48 AM
yes. The feature you need to look into is call AP Groups
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008073c723.shtml
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide