Solved: Re: 5520 controller

k.elnokrashy1 · ‎09-05-2022

I have a 5520 controller in Main office
now we will open a new branch with AP C9105A and C9800-L-C-K9

I need that all new access points to register in the 5520 controller and if the link is down they will register to the new one

1- is C9105A can work on 5520 controller
2- what do I need to configure that scenario

thanks a lot

balaji.bandi · ‎09-05-2022

1- is C9105A can work on 5520 controller

read the FAQ : (make sure you have right Code running to support new Cat 9K AP) 8.10.X

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9100ax-access-points/nb-06-802-11ax-faq-cte-en.html

2- what do I need to configure that scenario

You need to setup redundancy config

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

View solution in original post