01-07-2013 09:31 AM - edited 07-03-2021 11:18 PM
I recently purchased a few 6502i APs and have them connected to our 5508 WLC. I have all of the bands available, WMM, and all the MCS rates supported. For some reason, I'm not seeing the new APs listed under "Dual-Band Radios". Is there something I'm missing?
Solved! Go to Solution.
01-11-2013 12:42 PM
Here is an AC module on a 3602i
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
01-07-2013 09:34 AM
And your WLAN is configured to be either Open, or WPA2/AES only?
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
01-07-2013 09:38 AM
Correct.
Set to only WPA2 Policy and AES for Enc.
Using PSK with passthrough for the web policy.
01-07-2013 10:14 AM
Aaaaand totally misread this....
What country code are you using, and what type of 3502i? meaning 3502-?- A,E, etc.
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
01-07-2013 10:17 AM
I'm using 'A' code.
01-07-2013 10:19 AM
ok, so these are 3502i-A-k9. What country code are you set for on the WLC? US, MX etc? and do you have more than one?
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
01-07-2013 10:28 AM
I'm using Only US.
Do I need to use USX?
01-07-2013 10:32 AM
no, -A is for US. Are you sure they are 3502 and not 3501? Where are you looking at the "Dual-Band" AP ?
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
01-07-2013 10:34 AM
Wow.. I really wrote that wrong. Was configuring a 6500 switch while typing. They're 3602i and 3602e. I'm sorry about that.
01-07-2013 10:40 AM
Ha! no worries. Ok, so 3602i/e, running at least 7.2 (possibly 7.1....) to support them.
What version of code are you running specificaly? And still, were are you seeing the Dual-Band thing.
Is it that you are not seeing the A radio in the list?
HTH,
Steve
------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
01-07-2013 10:52 AM
I"m running 7.4.100.0.
Under Monitor>radios>Dual-Band Radios, as well.
They show up under a/n and b/g/n, but obviously not under "dual-band" as one would expect.
01-07-2013 10:38 AM
I'm looking at the "dual-band radios" section under Monitor>Access Point Summary.
01-07-2013 01:49 PM
For some reason, I'm not seeing the new APs listed under "Dual-Band Radios"
I've got some 3600 and they don't show up either. It's a bug.
We're contemplating of rolling back to 7.3.X.
01-11-2013 12:20 PM
Is this an actual technical problem or more of a managment annoyance?
My orginization has 50 controllers to upgrade and we are considering this code version.
01-11-2013 12:26 PM
Wait a minute... first off, you do mean the 3602i right? Well the Dual-Band Radios is only if your 3602 has the AC module, that module would show up there.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide