Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We need your support to deploy 9100 EWC in network. We have 9120 AXI WLC. Can EWC be deployed with LAG ? If yes, what would be steps from both end. Also suggest , if we are deploying EWC with redundancy.
The LAG support feature is applicable for access points that support multiple ethernet ports. However, the AP 9120AX only has one ethernet port, which makes it not LAG capable.
EWC is not capable of having its Gig 0 interface configured as trunk
EWC does not support SVIs
EWC is not capable of performing central switching
Gig 0 is the only interface that can be used as a Wireless Management
All of the EWC traffic has to be sourced from Gig 0 interface (including radius, capwap control, licensing traffic, and so on..)
EWC is not capable of performing embedded packet captures
EWC does not support APs in sniffer mode
EWC image does not boot up if there is another EWC, AireOS or 9800 WLC in the same broadcast domain. The AP will continue to function as a normal lightweight capwap AP until the other WLCs are removed from the network.
When converting or upgrading EWC in a deployment with mixed AP models, it is required to have a functioning TFTP server
