07-29-2021 12:46 AM
Hi,
Can we establish mobility tunnel between new 9800 series and 2500/5500 series WLC?
07-29-2021 12:52 AM
Yes, you can. You need to have a special 8.5.x code version on your 5508. Refer to the below document (2504 has been listed as unsupported).
HTH
Rasika
*** Pls rate all useful responses ***
07-29-2021 01:06 AM
Hi Rasika,
Many thanks for your response. regardless of 2504 support status. can we establish mobility tunnel to 2504 WLC (Anchor WLC) to 9800 foreign WLC? if not supported
07-29-2021 01:07 AM
You mean device end of support? or its not supported to establish mobility tunnel with 9800 wlc
07-29-2021 12:53 AM - edited 07-29-2021 12:53 AM
Not possible in 2504, but you can run in 3504,5508,5520, when it comes to 5508 please make sure that you run a IRCM capable image.
In 3504 & 5508 if you are running AireOS 8.8.111.0 and later it should support IRCM by default. Below is the detailed guide
07-30-2021 07:14 AM
And TAC recommeded releases: https://www.cisco.com/c/en/us/support/docs/wireless/wireless-lan-controller-software/200046-tac-recommended-aireos.html#anc10
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide