9800 WLC - Tag Source > Revalidate Tag Source on APs

[Charlie Grey]

what does enabling the above check box actually do?

[Charlie Grey]

[Haydn Andrews · Accepted solution]

If you change the TAG prorities this tick box will re-run against APs already assigned tags to update to the new order if ticked when hitting apply

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/newconfigmodel/b_catalyst-9800-configuration-model/m_configuring-tags.html

When you change the priority for the AP and filter, run the ap tag-sources revalidate command to evaluate the priority.