cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
365
Views
5
Helpful
2
Replies

9800 WLC - Tag Source > Revalidate Tag Source on APs

Charlie Grey
Beginner
Beginner

what does enabling the above check box actually do?

 

1 Accepted Solution

Accepted Solutions

Haydn Andrews
VIP Engager VIP Engager
VIP Engager

If you change the TAG prorities this tick box will re-run against APs already assigned tags to update to the new order if ticked when hitting apply

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/newconfigmodel/b_catalyst-9800-configuration-model/m_configuring-tags.html

When you change the priority for the AP and filter, run the ap tag-sources revalidate command to evaluate the priority.

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***

View solution in original post

2 Replies 2

Charlie Grey
Beginner
Beginner

2022-09-30_10h21_06.png

Haydn Andrews
VIP Engager VIP Engager
VIP Engager

If you change the TAG prorities this tick box will re-run against APs already assigned tags to update to the new order if ticked when hitting apply

https://www.cisco.com/c/en/us/td/docs/wireless/controller/9800/config-guide/newconfigmodel/b_catalyst-9800-configuration-model/m_configuring-tags.html

When you change the priority for the AP and filter, run the ap tag-sources revalidate command to evaluate the priority.

*****Help out other by using the rating system and marking answered questions as "Answered"*****
*** Please rate helpful posts ***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers