05-13-2024 02:53 AM
I am trying to figure out how to add an ap into a an existing EWC network currently have one ap c9130ax and I am trying to add another c9130ax both same country code, the new Ap has been reset and I believe it is in Capwap mode, currently I am unbale to see the new ap under the list of available ap I can only see it in the neighboring AP .Do I need to connect the TFTP server and if id o how to get the ap to connect to it your help is highly appreciated .
Solved! Go to Solution.
05-13-2024 03:32 AM - edited 05-13-2024 03:32 AM
- Basically standard capwap controller discovery methods can be used to find the EWC controller , such as DHCP option 43 (usually used). Indeed the EWC controller needs to get provisioned with an external tftp server to provide AP images. If problems persist after doing all of this then boot the complete AP boot process ,
M.
05-13-2024 09:12 AM
I think @marce1000 meant post the complete boot process <smile>
Connect a console to the AP then connect power. Capture everything on the console and save to a text file then attach here so we can see what it happening.
Is the AP connected to the same vlan/subnet as the EWC?
05-13-2024 03:32 AM - edited 05-13-2024 03:32 AM
- Basically standard capwap controller discovery methods can be used to find the EWC controller , such as DHCP option 43 (usually used). Indeed the EWC controller needs to get provisioned with an external tftp server to provide AP images. If problems persist after doing all of this then boot the complete AP boot process ,
M.
05-13-2024 09:12 AM
I think @marce1000 meant post the complete boot process <smile>
Connect a console to the AP then connect power. Capture everything on the console and save to a text file then attach here so we can see what it happening.
Is the AP connected to the same vlan/subnet as the EWC?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide