03-29-2019 03:08 AM - edited 07-05-2021 10:09 AM
After an unsuccessful change of software, the access point AIR-CAP2702E-E-K9 cyclically reboots.
There is no way to get to the command line interface.
The mode button for some reason has become disabled.
How can I restore the access point?
console output:
IOS Bootloader - Starting system.
flash is writable
Antigua Board
40MB format
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 277 files, 14 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 14249472
flashfs[0]: Bytes available: 26909184
flashfs[0]: flashfs fsck took 10 seconds.
Base Ethernet MAC address: d8:b1:90:47:5f:68
Ethernet speed is 100 Mb - FULL Duplex
button is pressed, wait for button to be released...
button pressed for 51 seconds
process_config_image_recovery Failure
Mode-Button not enabled
Loading "flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JH"...flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JH: magic number mismatch: bad mzip file
Error loading "flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JH"
Interrupt within 5 seconds to abort boot process.
Loading "flash:/ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-mx.153-3.JH"...#########################
File "flash:/ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-mx.153-3.JH" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Antigua Board Pre-Pilot
40MB format
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 277 files, 14 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 14249472
flashfs[0]: Bytes available: 26909184
flashfs[0]: flashfs fsck took 11 seconds.
flashfs[1]: 0 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 12257280
flashfs[1]: Bytes used: 1024
flashfs[1]: Bytes available: 12256256
flashfs[1]: flashfs fsck took 0 seconds.
Base Ethernet MAC address: d8:b1:90:47:5f:68
Boot CMD: 'boot flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JH;flash:/ap3g2-k9w7-xx.153-3.JH/ap3g2-k9w7-xx.153-3.JH'
Loading "flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JH"...###########################################
File "flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JH" uncompressed and installed, entry point: 0x1003000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C2700 Software (AP3G2-K9W7-M), Version 15.3(3)JH, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2018 by Cisco Systems, Inc.
Compiled Wed 18-Apr-18 05:19 by prod_rel_team
Antigua Board Pre-Pilot
40MB format
Tide XL MB - 40MB of flash
Initializing flashfs...
flashfs[2]: 277 files, 14 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 40900608
flashfs[2]: Bytes used: 14249472
flashfs[2]: Bytes available: 26651136
flashfs[2]: flashfs fsck took 12 seconds.
flashfs[2]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHE2.bin (No such file or directory)
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHB2.bin (No such file or directory)
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHV2.bin (No such file or directory)
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHX2.bin (No such file or directory)
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHHA2.bin (No such file or directory)
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHY2.bin (No such file or directory)
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHR2.bin (No such file or directory)
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHQ2.bin (No such file or directory)
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHC2.bin (No such file or directory)
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHF2.bin (No such file or directory)
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHU2.bin (No such file or directory)
%Error opening flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHtriggerfish_cpld.img (No such file or directory)
Uncompressing radio files...
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JH8004.img
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHE5.bin
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHB5.bin
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHV5.bin
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHX5.bin
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHHA5.bin
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHY5.bin
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHR5.bin
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHQ5.bin
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHC5.bin
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHF5.bin
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JHU5.bin
File not found: flash:ap3g2-k9w7-mx.153-3.JH/ap3g2-k9w7-xx.153-3.JH8006.img
...done Initializing flashfs.
Radio0 present 8764 8000 0 A8000000 A8010000 0
*Mar 1 00:00:16.791: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:18.183: %DOT11-4-LOADING_RADIO: Interface Dot11Radio0, loading the radio firmware (ram:)
*Mar 1 00:00:18.187: %DOT11-2-RADIO_FAILED: Interface Dot11Radio0, failed due to the reson code 44
-Traceback= 11B5350z 182ED90z 182F644z 21BFA6Cz 183E408z 12CD044z 12CD224z 12CD390z 10C2644z 10C28BCz 13472D4z 132E05Cz
*Mar 1 00:00:18.187: %SYS-5-RELOAD: Reload requested by Init. Reload Reason:
Radio FW image download failed ....
03-29-2019 05:05 AM
03-29-2019 05:19 AM
The problem is that it is impossible to switch to rommon, the mode button is not enabled.
03-29-2019 06:18 AM
03-29-2019 06:25 AM
03-29-2019 06:55 AM
03-29-2019 07:33 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide