Aironet 1300 serie - GUI DHCP Server

[SIBILLEDAMIEN]

Hello,

I need to configure DHCP Server on my Cisco 1310 AP, but I don't find configuring html page about DHCP Server service.

I thank you for your help.
Have a nice day.
 

Damien SIBILLE
IT training

AFPA Lorraine

[Prakash Parvathala]

Login to the Access point using GUI and go to HOME page.

You can see the option to configure the AP on left side of the GUI page there you have to click on Express setup and then you can configure the DHCP or Static.

Please look in to the below quick guide which has configuration steps with images.

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/1300/quick/guide/br13qsg.html

Following example shows how to configure DHCP service on the Cisco AP using CLI

Cisco-AP01#configure terminal

Cisco-AP01(config)#ip dhcp excluded-address 172.16.0.1 – 172.16.0.50

Cisco-AP01(config)#ip dhcp pool ITKE

Cisco-AP01(dhcp-config)# network 172.16.0.0 255.255.255.0

Cisco-AP01(dhcp-config)#lease 20

Cisco-AP01(dhcp-config)#default-router 172.16.0.1

Cisco-AP01(dhcp-config)#end

[SIBILLEDAMIEN]

Hello

Thx for your response but I've already configure static IP address on my access point. I need to configure DHCP server with GUI interface, no with command line.